Anand Furniture Pvt. Ltd. · Kathmandu · since 1998
We are not the cheapest quote you will get.
Here is where the money goes.
The board inside a wardrobe, the moisture in its frame and whether the people who built it are the people who hang its doors. We save money on none of the three, so we will never be your lowest number. We would rather be the last one you act on.
Now come inside
A house,
told room by room.
Ten rooms in one continuous walk, from the front door to the last wardrobe. Every piece in it is ours.
Scene 01of 10
The Entrance
The rooms
Choose where to begin.
Nine rooms, one grain. Every collection is designed to sit beside the others without a seam.
- 01Modular Kitchen
- 02Living Room
- 03Wardrobes
- 04Dining Tables
- 05Beds
- 06Sofas
- 07Parquet Flooring
- 08Railings
- 09Modular Design
Scene 07 / The Kitchen
Where every morning begins.
The catalogue
Every room, and what it starts at.
One piece from each of the nine rooms, with its starting price. Tap a room to see everything in it, add what you like to a list, or open the full catalogue.
Modular Kitchen
Aarohan Island Kitchen
Central island with breakfast ledge and integrated hob.
NPR 6,50,000
from · ready in 5–6 weeks
Living Room
Fluted Oak Media Wall
Floor-to-ceiling panelling with a floating walnut TV console.
NPR 2,85,000
from · ready in 4–5 weeks
Wardrobes
Aangan Walk-in Wardrobe
Open shelving, glass-front drawers and a central island dresser.
NPR 4,20,000
from · ready in 6 weeks
Dining Tables
Sabha Live-Edge Table
Single slab with butterfly joints and a blackened steel base.
NPR 2,40,000
from · ready in 5 weeks
Beds
Nidra Platform Bed
Tall upholstered headboard with floating side tables.
NPR 1,65,000
from · ready in 4 weeks
Sofas
Vana L-Shaped Sectional
Deep seat, loose back cushions, exposed teak base.
NPR 1,95,000
from · ready in 4 weeks
Parquet Flooring
Herringbone Oak
Classic 90-degree pattern, brushed surface.
NPR 850 per sq ft
from · ready in 2–3 weeks
Railings
Vertical Baluster Railing
Slim 40 mm balusters with a continuous wreathed handrail.
NPR 12,500 per running metre
from · ready in 3–4 weeks
Modular Design
Granth Library Wall
Integrated desk, hidden LED shelf lighting.
NPR 3,20,000
from · ready in 5–6 weeks
Indicative starting prices. Every piece is made to measure, so the final quote follows the site visit.
See all 32 designsThe material
Premium is a specification, not an adjective.
Every showroom in the city says premium. Almost none of them will write down what is inside the board. Here is ours, in full, before you ask.
Carcass
01
18 mm BWP marine plywood
Boiling-water-proof glue line. A Kathmandu monsoon swells particle board and MDF until the doors stop closing. This does not swell.
Frames & legs
02
Kiln-seasoned hardwood, 8–10% moisture
Timber that was still green when it was cut keeps shrinking after it reaches your house. That is why cheap frames open at the joints in the first winter.
Surfaces
03
0.6 mm natural wood veneer
A real slice of the same log, so the grain runs continuously across a whole wardrobe. Printed laminate repeats every few feet and the eye always catches it.
Hardware
04
Soft-close hinges, full-extension runners
Rated in tested opening cycles, not in years. The hinge is the first part of a kitchen to die, so it is the last part to economise on.
Finish
05
Hard-wax oil or fully cured PU
It sits in the wood rather than on top of it, so a scratch can be spot-repaired in your house instead of resprayed in ours.
Edges
06
Machine-pressed, sealed banding
That lifting strip on a five-year-old kitchen is a hand-glued edge. Pressed banding is sealed the same day the board is cut and does not peel.
Side by side
What you cannot see from the showroom floor.
The part
Anand
Usually sold as
Carcass board
18 mm BWP marine ply
12 mm MDF or particle board
Back panel
9 mm ply, screwed to the frame
3 mm sheet, stapled on
Frame timber
Kiln-seasoned, moisture checked
Air-dried, sold the same week
Hinges & runners
Soft-close, cycle-tested
Unrated, replaced within two years
Exposed edges
Pressed and sealed
Glued strip
Finish
Cured, spot-repairable
One spray coat
Timeline
In writing, before you pay
"Next week"
Straight answers
What the market tells you, and what is actually true.
You will hear all of these while you shop. Some of them are honest mistakes. The rest are how a thin board gets sold at a thick board's price.
01
The myth
“Solid wood is always better than plywood.”
The truth
Across a two-metre shutter, solid wood cups and splits as the seasons turn. Marine ply stays flat for decades. Solid wood belongs where it earns its place, in frames, legs and table tops, and we use it there. Anyone selling you solid panels everywhere is selling you future repairs.
02
The myth
“Modular means factory-made and generic.”
The truth
Modular is a method of building, not a style. Your wall is never the round number on the drawing, so every carcass is cut to the measurement we take on site, in your house, with a laser.
03
The myth
“Veneer is fake wood.”
The truth
Veneer is wood. It is a slice of the same log, laid over a substrate that will not move. It is how nearly every expensive piece of furniture in the world is made, because a solid panel that wide would tear itself apart.
04
The myth
“The shop down the road quoted half for the same thing.”
The truth
It is not the same thing, and the difference is in the parts you cannot see from the showroom floor. Ask them to write down the board thickness, the back panel, the hinge rating and whether the edges are sealed. Then put their sheet next to ours.
05
The myth
“Good furniture should be ready next week.”
The truth
Seasoned timber, a cured finish and a proper install take three to six weeks. Anything promised in a week skipped either the seasoning or the curing, and you will find out which one within a year.
06
The myth
“It is expensive.”
The truth
It costs more once. Priced across the years you actually use it, a wardrobe replaced twice in fifteen years is the expensive one. We would rather build you one piece than three.
How it is made
From a chosen board to a level door.
Six weeks, and this is where each of them goes. If a step here sounds slow, it is the step that decides whether the piece is still square in ten years.
01
We measure the wall you have
A laser survey of the room as it was actually built, not as it was drawn. Floors slope and corners are rarely square, and both change the cut list.
Day one
02
You hold the materials
Elevations to scale, the veneer and the finish in your hand, and a written specification with a price against every line. Nothing starts until you have signed that sheet.
Week one
03
Boards are chosen, not just ordered
Timber is picked for grain and checked for moisture before a single cut. A board that reads badly next to its neighbour goes back on the rack.
Week one to two
04
Cut, and sealed the same day
Panel-sawn to the millimetre. Every exposed edge is banded and pressed before the board leaves the bench, because an open edge drinks moisture overnight.
Week two to three
05
Joined, then left alone to cure
Dowelled and screwed, never stapled. Sanded up through the grits, finished, and then simply left. A finish that has not cured will print every fingerprint for a year.
Week three to five
06
Installed by the people who built it
Our own fitters, our own van. Levelled to your floor, scribed to your wall, and every door and drawer set by hand before we leave.
Week five to six
We come back at six months to re-set every hinge and runner, because timber and a new house both move in the first year. There is no charge for that visit.
Behind the scenes
Cut, joined and finished by the same hands.
Most furniture companies design in one place and build in another. Anand does both under one roof, so the person who drew your kitchen is the person who checks its final drawer. Boards are cut, edged and finished here, then loaded on our own van and installed by our own fitters.
- Founded
- 1998
- Workshop
- Our own, in Kathmandu
- Timber
- Kiln-dried walnut, oak, teak & ash
- Finishes
- Applied and cured on site
Ratings
What the houses say back.
“They walked us through the whole house on a screen before a single board was cut. The kitchen looks exactly like the render, only warmer.”
“Our parquet was laid in four days and finished on site. Three years on, not a single board has lifted.”
“The wardrobe was planned around our actual clothes. Every drawer has a purpose. That is the difference.”
“Beautiful dining table, honest lead time. Would have liked more fabric samples for the chairs but the finish is superb.”
Start your house
Tell us which room to begin with.
One call and we will visit, measure and sketch. No charge for the first conversation.